Picture the possibilities.
ELEVATION STONE / Natural stone
Cambrian Cream™ Sawn Heights Thin Stone Veneer
Natural natural stone thin veneer with a distinctive Dimensional texture. Explore the color range and finish, then build a coordinated palette for your architecture.
White / Buff / Rust / Tan / Cream
Stone specifications
| Product details | ¾” to 1½” (+/- ½") depths 3½”, 7½”, and 11½” (+/- ½”) sawn heights 6”-22”+ lengths average weight is 11-14 pounds per sq ft TV is packaged 3 ways: full pallet flats contain a random range of 252 to 330 sf crates are 100 sq ft of flats or 100 LF of corners handy packs include 5 sq ft of flats or 10 LF of corners in sawn heights of 3 ½” or 8 LF of corners in sawn heights of 7½” and 11½” |
|---|
Stone selection & installation in Colorado
For Denver, the Front Range and Mountain West, match each stone and finish to its intended exposure, load and setting method. Color alone does not establish freeze-thaw suitability. Request supplier test data and written guidance for the exact stone, thickness and finish before specifying exterior work.
Drainage, movement & winter exposure
Provide positive drainage and a properly prepared, compacted base. Confirm slope, setting materials, joints and movement details with your installer and the supplier. Standing water and saturated assemblies increase the risk of winter damage. Check deicing-salt compatibility; do not assume every natural stone tolerates salts.
Veneer & cladding details
Thin veneer is a facing material, not a structural retaining-wall system. Coordinate substrate, flashing, drainage, water management, mortar and movement joints with the project designer and applicable installation instructions.